Search
Close this search box.
Search
Close this search box.

Tellabs FlexSym Optical Line Terminal Six (OLT6)

Manufacturer Part Number: 81.11S-OLT6

Additional information

Manufacturer

Your Price: $0.00
Add to Quote
tempest-customer-support

Questions? Ask our experts today.

Tellabs FlexSym Optical Line Terminal Six (OLT6)
Designed for mid-sized enterprise deployments

The Tellabs FlexSym® Optical Line Terminal Six (OLT6) distribution shelf is designed for mid-sized enterprise deployments. The Tellabs FlexSym OLT6 is scalable for enterprise Optical LAN support of G-PON 2.5G, symmetrical XGS-PON 10G and future NG-PON2 40G.

Overview
The Tellabs FlexSym OLT6 shelf is ideal for space-challenged installations in data centers, communications closets and outdoor remote cabinets. It has redundant power rectifiers integrated with the distribution shelf, resulting in faster installations. By integrating the power rectification, the time and material needed to install this distribution shelf are significantly reduced. Just like all other Tellabs OLT distribution shelves, this Tellabs OLT6 leverages common software and common service cards. The OLT6 can be equipped with the Ethernet Switch Unit Thirty-Two (ESU32) for wide area network connectivity.

Scalability
The Tellabs FlexSym OLT6 distribution shelf supports 4 multi-purpose plug-in card slots that can be equipped from 4 to 32 PON ports. The OLT6 is architected with the necessary capacity for ITU-T 984 G-PON (2.5G), ITU-T 987/9807 symmetrical XGS-PON (10G) and beyond. There are two Ethernet Switch Unit plug-in card slots that can support from 1 to 4 10G and 4 to 8 1G wide-area network connections.

Stability
The Tellabs OLT6 distribution shelf-high availability configurations allowing redundant Ethernet Switch Units, Common Controls, Timings, Powering, Fans and Network Uplinks. Non-service affecting sideswitching, fail-over, or card-swapping at less than 50ms and any failover of redundantly deployed cards generates an alarm while service remains intact is supported by the OLT6.

Powering
Tellabs FlexSym OLT6 supports dual AC inputs for redundant power supply. The integrated redundant power rectifiers mean faster installations and less material needed to install this distribution shelf. It also improves system reliability.

Mounting
The OLT6 can be installed in both outdoor and indoor environments, including space-challenged installations in data centers, communications closets and outdoor remote cabinets. It supports both 19″ and 23″ brackets options.

  • Up to 32 PON interfaces and up to 2,048 ONTs (with OIU8)
  • 80 Gbps per multiservice slot capable
  • Ideal for G-PON 2.5G, XGS-PON 10G and future NG-PON2 40G
  • 48GbE in network connectivity (with redundant ESU32)

Please refer to Data Sheet for complete specifications.

Data Sheet